User Tools

Site Tools


videoconf:cisco

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
videoconf:cisco [2018/02/06 16:54] – [How to operate] deulvideoconf:cisco [2018/09/18 05:37] (current) – [Specifics] deul
Line 3: Line 3:
  
 ====Specifics==== ====Specifics====
-IP: 132.229.214.149\\ +{{ :videoconf:win_20180206_17_00_57_pro.jpg?200|}}IP: 132.229.214.149\\ 
-Protocol: H323\\+Protocol: H323/SIP\\
  
 ====How to operate==== ====How to operate====
Line 14: Line 14:
 Depending on a previous usage, one either sees on the display that the PC is not connected or one sees the startup screen from the Video Conferencing unit. In case the display says 'PC not connected' the desktop switch box has the PC button (on the third row) is highlighted. We want to use the Video Conferencing unit, so press the 'Video Conf' button to connect the Video Conferencing unit to the display. Depending on a previous usage, one either sees on the display that the PC is not connected or one sees the startup screen from the Video Conferencing unit. In case the display says 'PC not connected' the desktop switch box has the PC button (on the third row) is highlighted. We want to use the Video Conferencing unit, so press the 'Video Conf' button to connect the Video Conferencing unit to the display.
  
 +===Welcome===
 {{:videoconf:ciscosx20_welcome.jpg?200 |}}{{ :videoconf:win_20180206_16_58_43_pro.jpg?200|}}After a little while you are presented the 'Welcome' screen from the Video Conferencing unit. On this Welcome screen you see a green button that denote 'Call' {{:videoconf:ciscosx20_welcome.jpg?200 |}}{{ :videoconf:win_20180206_16_58_43_pro.jpg?200|}}After a little while you are presented the 'Welcome' screen from the Video Conferencing unit. On this Welcome screen you see a green button that denote 'Call'
  
Line 20: Line 21:
 To move back to the Welcome screen, use the Back arrow, just left below the arrow circle and Enter button. To move back to the Welcome screen, use the Back arrow, just left below the arrow circle and Enter button.
  
 +===Call===
 {{:videoconf:ciscosx20_call.jpg?200 |}} Once you entered the Call assistance window you see a list of previous incoming and outgoing calls. You can step through the list with the up/down arrow keys and once you are on the desired call number hit the right button which will bring you to the Call Initialization button. Pressing the central 'Enter' button will start the actual call. {{:videoconf:ciscosx20_call.jpg?200 |}} Once you entered the Call assistance window you see a list of previous incoming and outgoing calls. You can step through the list with the up/down arrow keys and once you are on the desired call number hit the right button which will bring you to the Call Initialization button. Pressing the central 'Enter' button will start the actual call.
  
Line 36: Line 38:
 On top of the display you see on the left the IP number of this unit. Once selected you can set some addition parameters of the device. In general it is not necessary to touch those parameters. On the right hand site one sees a Camera and Person icon. The Camera icon is the most important one because you can then modify the camera setting and display layout.  On top of the display you see on the left the IP number of this unit. Once selected you can set some addition parameters of the device. In general it is not necessary to touch those parameters. On the right hand site one sees a Camera and Person icon. The Camera icon is the most important one because you can then modify the camera setting and display layout. 
  
 +===Camera Control===
 {{:videoconf:ciscosx20_camera.jpg?200 |}}Select the Camera icon and you are presented the Camera/Display manipulation utility. Hitting the Enter key opens a control window from which you can direct the camera to left, right, up and down and which allows you to zoom in or out. This way you have full control over the camera direction and view.  {{:videoconf:ciscosx20_camera.jpg?200 |}}Select the Camera icon and you are presented the Camera/Display manipulation utility. Hitting the Enter key opens a control window from which you can direct the camera to left, right, up and down and which allows you to zoom in or out. This way you have full control over the camera direction and view. 
  
 On top of the Camera control window you see a 'Pin' icon. Selecting that icon and hitting the Enter button make the 'self view' from the Camera Control Window stick, thus changing the display from a full 'other end' display to a 'full other end with self view inset' display. You even have control over where the self view is placed in the display. On top of the Camera control window you see a 'Pin' icon. Selecting that icon and hitting the Enter button make the 'self view' from the Camera Control Window stick, thus changing the display from a full 'other end' display to a 'full other end with self view inset' display. You even have control over where the self view is placed in the display.
 +
 +Once you have ended your meeting, please use the desktop control box to switch 'Off' the display. The Video Conferencing unit will go into hibernation mode automatically.
 +
 +{{ :videoconf:trc6-sx10-sx20-user-guide-ce81.pdf |Cisco SX20 User Guide}}
videoconf/cisco.1517936079.txt.gz · Last modified: 2018/02/06 16:54 by deul