User Tools

Site Tools


institute_lorentz:xmaris

This is an old revision of the document!


Xmaris

Xmaris is a small computational cluster at the Lorentz Institute financed by external research grants. As such, its access is granted primarily to the research groups who have been awarded the grants. Other research groups wishing to use xmaris can enquire whether there is any left-over computing time by getting in touch with either

Xavier Bonet Monroig Oort 260
Carlo BeenakkerOort 261

to discuss what resources can be made available to their needs. After a preliminary assessment and approval, access to xmaris will be granted by the IT staff. Any technical questions should be addressed via https://helpdesk.lorentz.leidenuniv.nl to

Leonardo Lenoci HL409b

:!: External research groups to the Lorentz Institute are strongly encouraged to explore other HPC possibilities, such as the ALICE HPC cluster of the University of Leiden.

Xmaris is optimised for multithreading applications and embarrassingly parallel problems, but there have been some recent investments to improve nodes interconnection communications to enable multiprocessing. Currently, multiprocessing is possible on maris0[78-81] which are interconnected via an InfiniBand EDR switch. Each one of these nodes is capable of a practical 9.6 TFLOPS.

Xmaris is the successor of the maris cluster, renamed with a prefix x because its nodes deployment is automated using the xCAT software. Less formally, the presence of the x prefix also suggests the time of the year when xmaris was first made available to IL users, that is Christmas (Xmas).

Xmaris features and expected cluster lifetime

Xmaris runs CentOS v7.6 and consists for historical reasons of heterogeneous computation nodes. A list of configured nodes and partitions on the cluster can be obtained on the command line using slurm's sinfo.

:!: Because Xmaris features different CPU types that understand different types of instructions (see here), we have associated to each computation node a list of slurm Features that also describe the type of CPUs mounted in that node. To request allocation of specific features to the resource manager, see this example.

You can display nodes features with sinfo as below

sinfo -o " %n  %P %t %C %z %m %f" -N -n maris077
HOSTNAMES  PARTITION STATE CPUS(A/I/O/T) S:C:T MEMORY AVAIL_FEATURES
maris077  compIntel mix 10/86/0/96 4:12:2 512000 broadwell,10Gb,R830,highmem

Xmaris aims to offer a stable computational environment to its users in the period Dec 2019 – Jan 2024. Within this period, the OS might be patched only with important security updates. Past January 2024, all working xmaris nodes will be re-provisioned from scratch with newer versions of the operating system and software infrastructure. At this time all data stored in the temporary scratch disks will be destroyed and the disks reformatted.

Compute nodes data disks

All compute nodes have at least access to the following data partitions

Mount Point Type Notes
/scratch HD temporary, local
/marisdata NetApp 2TB/user quota, remote
/home NetApp 10GB/user quota, remote

Extra efficient scratch spaces are available to all nodes maris0[78,79,80,81] on the infiniband network

Mount Point Type Notes
/IBSSD SSD temporary, InfiniBand/iSER*
/PIBSSD SSDtemporary, InfiniBand/BeeGFS*

* iSER stands for “iSCSI Extensions for RDMA”. It is an extension of the iSCSI protocol that includes RDMA (Remote Dynamic Memory Access) support. BeeGFS is parallel filysystem. We are testing it until mid 2021.

Backup snapshots of /home are taken hourly, daily, and weekly and stored in /home/.snapshot/.

xmaris users are strongly advised they delete (or at least move to the shared data disk), if any, their data from the compute nodes scratch disks upon completion of their calculations. All data on the scratch disks might be cancelled without prior notice.

The home disk /home has a 10GB/user quota where as /marisdata has a 2TB/user quota. Note that these policies might change at any time at the discretion of the cluster owners.


:!: All data on the scratch partitions is assumed to be temporary and will be deleted upon a node re-installation.

:!: When usisng xmaris please note that the home partition is different than the IL workstations home.

:!: The OLD (as in the old maris) /clusterdata is deliberately made unavailable on xmaris, because it is no longer maintained. If you have any data on it, it is your responsibility to create backups. All data on /clusterdata will get permanently lost in case of hardware failure.

Xmaris usage policies

Usage policies are updated regularly in accordance with the needs of the cluster owners and may change at any time without notice. At the moment there is an enforced usage limit of 128 CPUs per user that does not apply to the owners. Job execution priorities are defined via a complex multi-factor algorithm whose parameters can be displayed on the command line via

scontrol show config | grep -i priority

Xmaris live state

To monitor live usage of Xmaris you can either

:!: The link above is accessible only within the IL workstations network.

How to access Xmaris

Access to Xmaris is not granted automatically to all Lorentz Institute members. Instead, a preliminary approval must be granted to you by the cluster owners (read here).

Once you have been authorised to use Xmaris, there are two ways to access its services:

  1. using an ssh client (traditional method).
  2. using a web browser (modern method).

Both methods can provide terminal access, but connections via web browsers offer you extra services such as sftp (drag-and-drop file transfers) and jupyter interactive notebooks. We advise all users unfamilair with GNU/Linux to use a web browser to interact with Xmaris.

Access via an ssh client

The procedure differs on whether you try to connect with a client connected to the IL intranet or not.

  • When within the IL network, for instance if you are using a Lorentz Institute workstation, you have direct access to Xmaris. Open a terminal and type the command below
ssh xmaris.lorentz.leidenuniv.nl -l username
  • When outside the IL network, for instance from home or using a wireless connection, you must first initiate an ssh tunnel to our SSH server and then connect to Xmaris
ssh -o ProxyCommand="ssh -W %h:%p username@styx.lorentz.leidenuniv.nl" username@xmaris.lorentz.leidenuniv.nl

:!: If you were a maris user prior to the configuration switch to xmaris, you might find out that many terminal functions and programs could not be working as expected. This is due to the presence in your xmaris home directory of old shell initialisation scripts still tied to the STRW sfinx environment. You can override them (preferably after making a backup copy) by replacing their contents with the default CentOS shell initialisation scripts, for instance for bash these are located in /etc/skel/.bashrc and /etc/skel/.bash_profile.

Web access

Xmaris services, that is terminal, scheduler/resource manager, jupyter notebooks and monitoring facilities, can be accessed easily via a browser without the need of additional plugins navigating to xmaris OpenOnDemand. Similarly to a traditional shell access, Xmaris OpenOnDemand is available only for connections within the IL subnetwork. IL users who wish to access OpenOnDemand from their homes could instruct their browsers to SOCKS-proxy their connections via our SSH server. Open a local terminal and type

ssh -ND 7777 <your_IL_username>@ssh.lorentz.leidenuniv.nl

then in your browser settings find the tab relative to the connection type and instruct the browser to use the SOCKS proxy located at localhost:7777 to connect to the internet.

Xmaris OnDemand allows you to

  • Create/edit files and directories.
  • Submit batch jobs to the slurm scheduler/resource manager.
  • Open a terminal.
  • Launch interactive jupyter notebooks.
  • Monitor cluster usage.
  • Create and launch your very own OnDemand application (read here).

:!: Please do not bookmark any other URL than https://xmaris.lorentz.leidenuniv.nl:4433 to connect to OpenOnDemand. Failing to do so can result in connection errors.

Xmaris Partitions

Partition Number nodes Timelimit Notes
compAMD* 11 15 days
compAMDlong 3 60 days
compIntel 2 5 days and 12 hours
gpuIntel 1 3 days and 12 hours GPU
ibIntel 4 7 days InfiniBand, Multiprocessing

*: default partition

Xmaris GPUs

NodePartitionGPUsCUDA compatibility
maris075 gpuIntel2 x Nvidia Tesla P100 16GB 6.0

Use the –gres slurm option to allocate them for your job, for instance via srun -p gpuIntel –gres=gpu:1 –pty bash -i.

Xmaris scientific software

Xmaris uses EasyBuild to provide a build environment for its (scientific) software. Pre-installed software can be explored by means of the module spider command. For instance, you can query the system for all modules whose name starts with `mpi' by executing module -r spider '^mpi'. Installed softwares include

GCC GNU Compiler Collection
OpenBLAS Basic Linear Algebra Subprograms
LAPACK Linear Algebra PACKage
ScaLAPACK Scalable Linear Algebra PACKage
CUDA Compute Unified Device Architecture
FFTW Fastest Fourier Transform in the West
EasyBuild Software Build and Installation Framework
GSL GNU Scientific Library
HDF5 Management of Extremely Large and Complex Data Collections
git Distributed Version Control System
Java General-Purpose Programming Language
Miniconda Free Minimal Installer for Conda
OpenMPI Open Source Message Passing Interface Implementation
Python Programming Language
PyCUDA Python wrapper to CUDA
Perl Programming Language
R R is a Language and Environment for Statistical Computing and Graphics
Singularity Containers software
Tensorflow Machine Learning Platform
plc The Planck Likelihood Code
cobaya A code for Bayesian analysis in Cosmology
Clang C language family frontend for LLVM
Octave GNU Programming language for scientific computing
Mathematica* Technical computing system

* Usage of proprietary software is discouraged.

For an up-to-date list of installed software use the module avail command. Any pre-installed software can be made available in your environment via the module load <module_name> command.

It is possible to save a list of modules you use often in a module collection to load them in one command

module load mod1 mod2 mod3 mod4 mod5 mod6
modules save collection1 
module restore collection1
# list collections
module savelist

Installing extra software

If you need to run a software that is not present on Xmaris, you might:

  1. Request its installation via https://helpdesk.lorentz.leidenuniv.nl
  2. Install it yourself
    • via EasyBuild (see instructions below on how to setup your personal EasyBuild environment)
    • via a traditional configure/make procedure

Whatever installation method you might choose, please note that you do not have administrative rights to the cluster.

Installing software via EasyBuild

In order to use EasyBuild to build a software, you must first set up your development environment. This is usually done by

  • Loading the EasyBUild module
  • Indicating a directory in which to store your EasyBuild-built softwares
  • Specifying EasyBuild's behaviour via EASYBUILD_* environment variables
  • Build a software

In their simplest form, the steps outlined above can be translated into the following shell commands

module load EasyBuild
mkdir /marisdata/<uname>/easybuild
export EASYBUILD_PREFIX=/marisdata/<uname>/easybuild
export EASYBUILD_OPTARCH=GENERIC

eb -S ^Miniconda
eb Miniconda2-4.3.21.eb -r

:!: The environment variable EASYBUILD_OPTARCH instructs EasyBuild to compile software in a generic way so that it can be used on different CPUs. This is rather convenient in heterogeneous clusters such as xmaris to avoid recompilations of the same softwares on different compute nodes. This convenience comes of course at a cost; the executables so produced will not be as efficient as they would be on a given CPU. For more info read here.

:!: When compiling OpenBLAS it is not sufficient to define EASYBUILD_OPTARCH to GENERIC to achieve portability of the executables. Some extra steps must be taken as described in https://github.com/easybuilders/easybuild/blob/master/docs/Controlling_compiler_optimization_flags.rst. A list of targets supported by OpenBLAS can be found here.

Then execute

module use /marisdata/<uname>/easybuild/modules/all

to make available to the module comamnd any of the softwares built in your EasyBuild userspace.

:!: module use <path> will prepend <path> to your MODULEPATH. Should you want to append it instead, then add the option -a. To remove <path> from MODULEPATH execute module unuse <path>.

Should you want to customise the building process of a given software please read how to implement EasyBlocks and write EasyConfig files or contact Leonardo Lenoci (HL409b).

Working with conda modules

Several conda modules are ready-to-use on maris. A possible use of these could be to clone and extend them with your packages of choice. Mind though that if you run conda init, conda will modify your shell initialisation scripts (e.g. ~/.bashrc) to load automatically the chosen conda environment. This causes several problems in all cases in which you are supposed to work in a clean environment.

The steps below show as an example how you could skip conda init when activating a conda environment.

> ml load Miniconda3/4.7.10
> conda create --name TEST

# the following fails
> conda activate TEST

CommandNotFoundError: Your shell has not been properly configured to use 'conda activate'.
To initialize your shell, run

    $ conda init <SHELL_NAME>

Currently supported shells are:
  - bash
  - fish
  - tcsh
  - xonsh
  - zsh
  - powershell

See 'conda init --help' for more information and options.

IMPORTANT: You may need to close and restart your shell after running 'conda init'.

## do this instead
> source activate TEST
> ...
> conda deactivate

How to run a computation on Xmaris

Xmaris runs the slurm scheduler and resource manager. Computation jobs must be submitted as batch jobs or be run interactively via slurm. Any other jobs will be terminated without prior notice. Because this is not a slurm manual, you are encouraged to learn the basics by reading the slurm manual. Here we only give you a few simple examples.

Batch jobs

Batch jobs are computation jobs that do not execute interactively.

To submit a batch job to Xmaris' slurm you must first create a shell script which contains enough instructions to request the needed resources and to execute your program. The script can be written in any known interpreter to the system. Slurm instructions are prefixed by the chosen interpreter comment symbol and the word SBATCH. An example bash-batch script that will request Xmaris to execute the program hostname on one node is

cat test.sh
#!/bin/env bash
#SBATCH --job-name=super
#SBATCH --ntasks=1
#SBATCH --mem=1000
srun hostname

Batch scripts are then submitted for execution via sbatch

sbatch test.sh
sbatch: Submitted batch job 738279474774293

and their status [PENDING|RUNNING|FAILED|COMPLETED] checked using squeue. You can recur to the command sstat to display useful information about your running job, such as memory consumption etc…

ssh shell access to an executing node is automatically granted by slurm and can also be used for debugging purposes.

Please consult the slurm manual for all possible sbatch options.

Interactive jobs

Interactive jobs are usually used for debugging purposes and in those cases in which the computation requires human interaction. Using interactive sessions you can gain shell access to a computation node

srun --pty bash -i

or execute an interactive program

srun  -p compIntel -N1 -n 1 --mem=4000 --pty python -c "import sys; data = sys.stdin.readlines(); print(data)" -i
Hello world
^D
['Hello world\n']

Parallelism 101

A parallel job runs a calculation whose computational subtasks are run simultaneously. The underlying principle is that large computations could be more efficient if divided into smaller ones. Note however, that parallelism can in fact decrease the efficiency of a poorly written code in which communication and synchronisation between the different subtasks are not handled properly.

Parallelism is usually achieved either by

  • multithreading (shared memory) on multiple cores of a single node
  • multiprocessing (distributed memory) on multiple nodes

Multithreading

In multithreading programming all computation subtasks (threads) exist within the context of single process and share the process' resources. Threads are able to execute independently and are assigned by the operating system to multiple CPU cores and/or multiple CPUs effectively speeding up your calculation.

Multithreading can be achieved using libraries such as pthread and OpenMP.

Multiprocessing

Multiprocessing usually refers to computations subdivided into tasks that run on multiples nodes. This type of programming increases the resources available (e.g. more memory) to your computation by employing several nodes at the same time. MPI (Message Parsing Interface) defines the standards (in terms of syntax and rules) to implement multiprocessing in your codes. MPI-enabled applications spawn multiple copies of the program, also called ranks, mapping each one of them to a processor. A computation node has usually multiple processors. The MPI interface lets you manage the allocated resources and the communication and synchronisation of the ranks.

It is easy to imagine how inefficient can be a poorly-written MPI application or an MPI application running on a cluster with slow nodes interconnects.

Hybrid Applications

This term refers to applications that use simultaneously multiprocessing (MPI) and multithreading (OpenMP).

How to launch a jupyter notebook

To launch a jupyter notebook login to xmaris OnDemand, select Interactive Apps –> Jupyter Notebook and specify the resources needed in the form provided, push Launch and wait until the notebook has launched. Now you can interact with your notebook (click on Connect to Jupyter), open a shell on the executing node (click on Host >_hostaname), and analyse notebook log files for debugging purposes (click on Session ID xxxx-xxxx-xxxxx-xxxxxxx-xxx-xx).

If your notebook does not launch in a few seconds take the following actions

  • Check the status of your jobs in the queue with squeu -u <username>.
  • Examine the notebook log files (click on Session ID xxxx-xxxx-xxxxx-xxxxxxx-xxx-xx).
  • If the suggestions above do not help, contact support.

How to launch a jupyter notebook that uses GPUs

Repeat the steps above but make sure you select an appropriate GPU partition. Moreover, you must add an appropriate CUDA module to the field Extra modules needed otherwise the connection to the GPUs might not work as expected. For a list of cuda modules you could type in a terminal ml spider CUDA. The form field Extra modules needed can accept more than one module as long as the modules names are separated by a space.

:!: NOTE1: If you want your notebook directory to be different than $HOME, please do export NOTEBOOKDIR=/marisdata/$LOGNAME in your .bashrc

:!: NOTE2: Any form fields left empty will assume pre-programmed values. For instance, you do not need to specify your slurm account because it will default to the account of your PI.

Launching jupyterlab instead of jupyter notebook

If you prefer the newest jupyter notebook features and interface, that is jupyetrlab, just proceed as above and after clicking on Connect to Jupyter replace the string tree with the string lab in the URL bar of your browser. For instance, a typical jupyterlab interface URL could look like this

https://xmaris.lorentz.leidenuniv.nl:4433/node/maris051.lorentz.leidenuniv.nl/26051/lab?

Custom jupyter kernels

A jupyter notebook kernel defines the notebook interpreter, such as python, R, matlab, etc…

It is possible to define custom kernels, for instance for a particular version of python including additional packages. The example below show how to install a python v3 kernel containing some additional python packages that you will then be able to use in your notebooks.

Create a python v3.5 kernel with additional numpy pkg

You can list all already available kernels

jupyter kernelspec list

then proceed to create a new one, for instance

module load Miniconda3/4.7.10
conda create --name py35 python=3.5 # default location in $HOME/.conda/envs/py35
source activate py35
conda install ipykernel
ipython kernel install --name=py35kernel --user
Installed kernelspec py35kernel in $HOME/.local/share/jupyter/kernels/py35kernel
conda install h5py
source deactivate py35

:!: Note that conda is a full package manager and environment management system and as such it might perform poorly in large environments.

Launch a jupyter notebook as described above and select the newly created py35kernel as shown in the figure below

numpy will also be available

:!: Should you not need a conda environment anymore, please do not forget to clean up from time to time

# first remove the kernel 
source activate py35
jupyter kernelspec list
jupyter kernelspec uninstall py35
source deactivate py35
# then delete the kernel environment 
conda env remove --name py35

Install a mathematica (wolfram) kernel

Debugging jupyter lab/notebook sessions

xmaris OpenOnDemand writes jupyter sessions logs to subdirectories located in $HOME/ondemand/data/sys/dashboard/batch_connect/sys/jupyter/output/. Before contacting the helpdesk you are advised you analyse the contents of these subdirectories (one for each session) in particular the files called output.log and config.py.

:!: Do not forget to clean up any session logs from time to time to avoid gettong over your allocated quota.

xmaris slurm tips

:!: This is not a slurm manual, you should always refer to the official documentation (see link below).

xmaris runs the scheduler and resource manager slurm v18.08.6-2. Please consult the official manual for detailed information.

:!: The headnode (xmaris.lorentz.leidenuniv.nl) is not a compute node. Any user applications running on it will be terminated without notice.

Here we report a few useful commands and their outputs to get you started. For the inpatients, look at the following slurm batch-script generator (NO RESPONSIBILITIES assumed! Study the script before submitting it.) which is available only from withing UL IPs.

Determine your slurm account name

sacctmgr show users <username>

Display detailed information about a node

sinfo -o " %n  %P %t %C %z %m %f %l %L" -N -n maris077

Display detailed information about all nodes

sinfo -o " %n  %P %t %C %z %m %f %G %l %L" -N

Launch an interactive session on a node

srun -w maris047 --pty bash -i

Display status of your jobs

squeue -u <username>

Interactive use of GPUs

srun -p gpuIntel --gres=gpu:1 --pty bash -i

Request nodes with particular features

srun --constraint="opteron&highmem"  --pty bash -i

Run a multiprocessing application

srun -p ibIntel -N 4 -n4 -c1 --mem=16000 --pty bash -i
module load foss
ulimit -l unlimited
mpirun --mca btl openib,vader,self <YOUR_MPI_APP>

https://www.open-mpi.org/faq/?category=openfabrics#ib-btl

Suggested readings

Requesting help

Please use this helpdesk form or email support.

Recent Scientific Publications from maris

Quantum computing

Statistical, nonlinear, biological, condensed matter and soft matter physics

Particles, fields, gravitation, and cosmology

String theory

institute_lorentz/xmaris.1611736286.txt.gz · Last modified: 2021/01/27 08:31 by lenocil